V-Figurative Airplane

This original and easy to make airplane is shaped like a checkmark and resembles a bird in flight
To build it you will need a sheet of watercolor paper, a wooden skewer, modeling clay and PVA glue
1)Preparing the blanks
Cut two identical paper strips approximately 100 mm wide from the watercolor sheet

2)Preparing the front wing
Since the model is assembled using a canard scheme, evenly cut off about 2 or 3 cm from the edges of the front wing so that it becomes smaller than the rear wing
3)Bending the tabs
At a distance of 50 mm draw a line strictly perpendicularly using any rounded object to neatly fold the tab
Bend this tab and glue it using PVA glue or any other suitable glue for watercolor paper

4)Forming the V shaped profile
Fold each piece in the center at an angle of approximately 45 degrees giving the wings a checkmark shape
5)Assembling onto the skewer
Glue the rear wing to the wooden skewer first and see how it is secured
After that glue the front wing closer to the nose section at the exact same angle for smooth flight

6)Balancing and launching
Attach a piece of modeling clay to the very tip of the skewer in front
Make test launches and adjust the amount of modeling clay for proper balance